.45 Wax Bullet Brass (Large Pistol Primer Drop-In) 50ct

NO LOADING TOOLS NEEDED!

.45 Wax Bullet Brass (Large Pistol Primer – Drop-In / With Enlarged Flash Hole) Box of 50 – $59.99

This brass is customized for large pistol primers, with an oversized Primer Pocket & Flash-Hole.  This totally eliminates the need for standard Loading Tools since they simply “drop-in” as they’re being loaded into your revolver.  Then, once you have closed your Loading Gate, they will not Fall Out.  Since they fit firm enough to be held in place to be fired as they are being struck by a Firing Pin, but technically loose enough to move back slightly back and forth as the cylinder turns while the pistol is being cocked, they will not jam your revolver.  Once you’re done firing the rounds, simply open your loading gate empty the rounds and the primers will then fall out.  Just wipe the easy to clean nickel-plated brass, reload the wax bullets and you’re ready to reload again. This makes for quieter practice so not to disturb neighbors. 

If you are having trouble with shotgun primer back-outs because you can’t find RIO, Wolf or Nobel Sport; this may be the solution to your problem since they will work with any common brands of large pistol primers.  This option works well to counteract the message below, but it will require a little practice in being careful in loading the rounds into your revolver to learn how to not the large pistol primers.  I suggest that you load the rounds into your revolver first without the primers, then turn the cylinder again while pointing the revolver straight downward to load the primers and closing your loading gate or action.  With a little practice you’ll have it down in no time.

THE FOLLOWING IS AN IMPORTANT GENERAL MESSAGE FOR ALL THOSE WHO SHOOT WAX BULLETS:  Did you Know?  That when shooting live ammunition with full weighted bullets (lead or jacketed) all primers actually back-out of primer pockets for less than a millisecond. But, within that same millisecond the recoil force of the casing head slamming against the breach (blast shield) of the firearm flattens backed-out primers before they can ever cause any jam of any action, especially in that of a revolver.  When shooting wax bullets instead of full-weighted bullets that recoil force is not sufficient to flatten backed-out primers.  Therefore, our goal is to prevent the primer from backing out in the first place.  This is why when using pistol primers we enlarge flash-holes in primer pockets and with shotgun primers, we seek to find brands where the center portion of the shotgun primer does not back-out from the hull that contain it.  We have found that most U.S. brands like Winchester, CCI, Federal, and Remington do have back-out problems in most revolvers. While European brands like RIO, Nobel Sport, Fiocchi, and Cheddite are less likely to back-out in most revolvers.  This can also depend on other factors, especially head-spacing, in each revolver.

Delivery 1-2 weeks